Well, lets say its okay to mix those epoxy stuff indoor. But make sure to have good vetilation or gasmask when working with those poisones stuff. I worked 6 years in different cargo and tanker ships and know how bad it is for your health. Se be careful. Maybe put up the cockpit tent (Sittbrunnstält) and mix it there.

Main thing is not to mix the two, but doubtful you'd make that mistake.

No projects in the galley. I have some sheets of about 5mm plyboard that cover the salon table (to protect it) and fit under the aft berth mattresses for storage.

I also cut fender boards so they fit across the cockpit seats (make sure they fit somewhere for storage - mine bolt across the transom opening in the pushpit for storage and as a mounting point for fuel jugs). Across the cockpit seats they give me a place to clamp a vise. I also have an old (retired) wooden cutting board that I can clamp to the fender boards to use as a small workbench. I can sit on the cockpit grating and lean back against the steering pedestal while I work.

Thanks for your tips guys.